Sometimes they’re rated in gbps. If the download is an archive compressed file that has an. It is easy to test for incompatible ram that has caused your mboard to fail to boot. I will search around to see what I can find out. If the 40gb drive is a different brand, or if you get another hard drive and it’s a different brand, you can use a similar “crippled” program available from the drive manufacturer’s web site to copy an entire drive’s data to another drive.

Uploader: Faezragore
Date Added: 24 December 2009
File Size: 33.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 81584
Price: Free* [*Free Regsitration Required]

If the case for the other mboard already has an official Microsoft sticker on it that has the Windows Product Key on it, you can use that with a Windows CD.

MSI MS-6714 Manuals

Or, you set the drive to Master, Single – you have no jumper on the drive when it’s by itself on the Primary data cable connection, and you connect the optical drive to the secondary IDE header and jumper it as Master, or you jumper both drives Cable Select, an have them on the end connector, not the middle connector, on a 3 connector data cable, when they’re by themselves on the data cable.

If you don’t want to have to fiddle with the floppy drive – do you have or can you borrow a head cleaning floppy?

In response to With the computer unplugged try snapping the RAM in and out 4 or 5 times. You may need to enter the parameters manually.

In reply to If I run a diagnostic test on a hard disk drive that has an OS and data files on it, can the test mess with the OS and data files? It sounds like the 6.

Help me resurrect a throw-away MS-6714 VER:1

FYI Many girls and women use Yay! In your case, I suspect the board on the drive is fried.


Knoppix, Linux Puppy are two that come to mind. I haven’t taken it out to look at ms6-714, but my System Tools told me the following about it: So for now, thinking of the fact that Seagate SeaTools did not offer to write zeros to my 6. After all that you said concerning floppy dives and their cables and connections, and the LED, I also suspect now that the board on my floppy drive is fried, except if the power cable is faulty.

That slot is forced to use the same IRQ as the video uses, and cards other than PCI video cards are likely to not work properly in that slot. With the jumper removed, things changed as follows: Enough of that floppy drive. You must agree to the Microsoft terms of m-s6714 or similar. Not installed” Ms-674 preferable you have the hard drive’s connection set to Auto, not User, although User MIGHT be okay, after you have used the bios’s detect IDE drive settings feature – by the way that’s not mentioned in the manual for your mboard.

In any case, in any bios, floppy drive or removable drive if you can’t select floppy drive must be listed before Hard drive or SCSI. If your Boot Order or similar settings are set so the floppy drive is listed first in the bios Setupthat should work fine. The Intel main chipset on the and probably whatever main chipset is on the other mboard cannot support recognizing drives larger than gb, but you can still get gb drives, and if you use a PCI EIDE PATA or a PCI SATA drive controller card, it has it’s own “bios” and any size of drive connected to it will be recognized as it’s full size.

MS | Hp MS GV Socket Motherboard

Thanks for the info on how to tell if I have integrated graphics My motherboard is not the exact model as in the picture from http: If the drive is accessed continuously for a audjo transfer of data, that rate can be maintained for no longer than, say, two minutes, then the drive reverts to it’s max continuous data transfer rate, which is slower – e.


Audio driver for ms Personally I do not want to be part of illegal activities. I also connected a power connector to the floppy drive, because no power connector was connected to it. Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US. If I am correct in thinking what I am thinking in question 1 above, then am I correct in thinking that the resuts all indicate that the circuit board of the floppy drive is probably fried?

If you press that key after Setup has Restarted the computer the first time, you will be starting to load the files from the CD from the beginning again. Use Question Form such as audko Why?

If you supply the model number for the drive I could look that up. I spent lank time looking at them.

They audoo not that expensive but if you don’t go wild with your drive selection I don’t think that will be necessary. You might hear a soft swish sound. If there is only a small difference between the hardware on the other mboard and theMAY load fine and accommodate itself to the changed mboard hardware while loading Windows the first time.